PHONE
+91 79 400 911 11
EMAIL
info@a1acid.com
Nitric acid (HNO3), The pure compound is colorless, but older samples tend to acquire a yellow cast due to decomposition into oxides of nitrogen and water. Most commercially available nitric acid has a concentration of 68% in water. When the solution contains more than 86% HNO3, it is referred to as fuming nitric acid. Depending on the amount of nitrogen dioxide present, fuming nitric acid is further characterized as white fuming nitric acid or red fuming nitric acid, at concentrations above 95%.
Nitric acid is the primary reagent used for nitration – the addition of a nitro group, typically to an organic molecule. While some resulting nitro compounds are shock- and thermally-sensitive explosives, a few are stable enough to be used in munitions and demolition, while others are still more stable and used as pigments in inks and dyes. Nitric acid is also commonly used as a strong oxidizing agent.
Tanker Load, Seal Pack Drum, Repack Drum.
| HNO3 concentration | 61.5 ± 0.5% by wt. 68%, 72% |
| Nitrous Oxide as HNO2 | 500 ppm max. |
| Chloride as Cl | 10 ppm max. |
| Sulphate as H2SO4 | 50 ppm max. |
| Arsenic as As | 2 ppm max. |
| Residue on Ignition | 100 ppm max. |
| Heavy Metal as Pb | To pass the test |
| Specific Gravity | 1.368 at 25°C |
Nitric Acid is a strong acid with chemical formula HNO3. It is also known as the spirit of niter and aqua fortis. In its pure form, it is colourless but as it gets older it turns into a yellow cast. This colour appears due to the decomposition of Nitric acid to oxides of nitrogen and water. It is highly corrosive and toxic. It causes severe skin burn. It reacts with hydroxides, metals, and oxides to form nitrate salts. The solution is also referred to as fuming nitric acid or strong nitric acid,depending on the amount of nitrogen dioxide present. At higher concentrations above 95%, Nitric Acid is differentiated toWhite fuming nitric acid or red fuming nitric acid.
Widely used in the manufacture of Organic Synthesis, Dyes, Drugs, Explosives, cellulose Nitrate, Nitrate salt, Nitro Benzene, Nitro Chloro benzene, Aniline, TDI and other Nitro Derivatives, Nitro Toluene, Acrylic Fibre, Dyestuff and Dye Intermediates, Photo Engraving, Oxidizer in Liquid Rocket Propellants, etc.
HNO3 is used as a strong oxidizing agent. It can be manufactured by the catalytic oxidation of ammonia. It is a common reagent used in laboratories and an important chemical used in industries to manufacture explosives and fertilizers. Due to low Nitrous and Iron content, it is ideally suited for Nitro-Glycerine based explosives and Nitro-Cellulose explosives manufacturing.
Supplied in Tankers withAluminium build.
| HNO3 concentration | 98.5 % by wt. min. |
| Sulphate as H2SO4 | 200 ppm max. |
| Nitrous Oxide as HNO2 | 500 ppm max |
| Chloride as Cl | 10 ppm max. |
| Residue on Ignition | 500 ppm max. |
| Heavy Metal as Pb | To pass the test |
| Specific Gravity | 1.5 at 25 deg C |
| CAS No. | 7697-37-2 |
| UN No. | 2031 |
MTPD. The main raw material for Sulphuric Acid is Sulphur.
Fertilizers, Rayon, Steel Industry, Refineries, Petrochemicals, Paints, Textiles, For the production of Hydrochloric Acid, Phosphoric Acid, Boric Acid, Synthetic Detergents, Aviation Gasoline, Laboratory Reagents, Dyestuffs, Dairy Industries
Tanker Load, Seal Pack Drum, Repack Drum.
| Total Acidity (as H2SO4)% by mass, Min. | 98.0% |
| Residue on ignition % by mass, Min. | 0.2% |
| Iron (as Fe) % by mass, Min. | 0.05% |
| Lead (as Pb) % by mass, Min. | 0.005% |
| Arsenic (as As) % by mass, Min. | 0.004% |
Hydrochloric acid is manufactured to food grade and industrial grade specifications. Food grade hydrochloric acid finds use in the production of food ingredients, food additives and in the sugar and brewery industries, while the industrial grade finds application in metal pickling, latex coagulation, dyestuffs, leather treatment, petroleum refining, galvanising and water treatment.
Monosodium glutamate, Glutamic acid, Dyes, Latex coagulation, Metal pickling, Petroleum refinery, Floor cleaning product, Phosgene, Leather industry, Sugar refining, Brewery, Galvanising, Water treatment
Tanker Load, Seal Pack Drum, Repack Drum.
| Total acidity as HCl, per cent by mass | Min. 31 |
| Iron as Fe, ppm | Max. 1 |
| Total halides as free chlorine , ppm | Max. 20 |
| Specific gravity at 25oC | Min. 1.15 |
Solvent in Printing inks, Paints and Coatings, Laminates, Flexible Packaging, Aluminium Foil, Pesticides, Flavour in Pharmaceuticals, Nitrocellulose, Varnishes, Synthetic Fruit Essence, Perfumes, Photographic Films and Plates, Adhesives, Pharmaceuticals
HM-HDPE Drums (210 Kgs), Tankers
| Appearance | Clear liquid |
| Ester content as Ethyl Acetate | 99.90% min. by wt. |
| Water | 500 ppm max. |
| Colour | 10 APHA max. |
| Acidity as Acetic Acid | 100 ppm max |
| CAS No. | 141-78-6 |
| U.N. No. | 1173 |
| Specific Gravity | 0.890-0.903 at 20°C |
| Residue on Evaporation | 20mg / 100ml. max |
| Ethyl Alcohol Content | 750 ppm max. |
| Boiling Point | IBP - 76°C FBP - 78.5°C |
Laminates / Plywood Dyes, Pigments and CPC Blue, Urea Formaldehyde Resins (UFR), Preparation of Diesel Exhaust Fluid (DEF)
Cattle Feed
In 45 Kgs HDPE bags
Chemicals : Acetic Anhydride, Monochloro Acetic Acid, Vinyl Acetate Monomer(VAM), Acetates, Purified Terephthalic Acid(PTA), Diketene Derivatives.
Dyes & Dye Intermediates : Acetic Acid is used in textile industries for textile processing and printing.
Stainless Steel tanker, HDPE Carboys
| Acetic Acid | 99.85 % min. by wt. |
| Water | 00.15% max. |
| Colour | 10 APHA max. |
| Formic Acid | 0.05 % max. by wt. |
| Acetaldehyde | 0.05% max. by wt. |
| Heavy Metals as Pb | Less than 2 ppm |
| Iodides | 40 ppb max. |
| Permanganate | 2.00 hrs. min. |
| Freezing Point | 16.4 deg C |
| Specific Gravity | 1.049 at 25 deg C |
| CAS No. | 64-19-7 |
| UN No. | 2789 |
Methanol (methyl alcohol) is a colorless toxic, flammeable liquid with a distinctive odor and is produced in a catalytic industrial process directly from carbon monoxide, carbon dioxide and hydrogen mainly used as a lab solvent for production of other chemicals.
Acetic Acid, Pentaerythritol, D.M.T., Chloromethanes, Synthetic Resin ,Refrigerants, Paper Treatment, Insecticides, Formaldehyde, MTBE, Methyl Methacrylate, Di Methyl Sulphate, Organic Derivatives, Moulding Material, Pesticides, Disinfectant, Hexamine, TAME, Methyl Amines, Di Methyl Amines, Paints, Fumigant for Foodgrains Tanning, Bulk Drugs.
Tanker Load
| No. | Item | Limit | Analysys Method |
| 1 | Appearance | Clear and free of suspensed matter | IMPCA 003-98 |
| 2 | Purity % W/T on dry basis | min. 99.85 | IMPCA 001-02 |
| 3 | Colour Pt-Co | max. 5 | ASTM D 1209-05 |
| 4 | Water % W/W | max. 0.1 | ASTM E 1064-05 |
| 5 | Distillation range at 760 mm Hg | max. 1.0 deg C to 6 4.6 + or - 0.1 deg C | ASTM D 1078-05 |
| 6 | Specific Gravity 20 deg/20 deg | 0.791 - 0.793 | ASTM D 4052-02 |
| 7 | Potassium Permanganate time test 15 deg C | min. 60 | A STM 1363-94 |
| 8 | Carbonizable substances (Sulphuric Acid Wash Test) Pt-Co scale | max. 30 | ASTM E 346-03 |
| 9 | Ethanol mg/kg | max. 50 | IMPCA 001-02 |
| 10 | Chloride as Cl mg/kg | max. 0.5 | IMPCA 002-98 |
| 11 | Sulphur mg/kg | max. 0.5 | ASTM D 3961-98 |
| 12 | Hydrocarbons | pass test | ASTM D 1722-04 |
| 13 | Carbonilic Compound as Acetone mg/kg | max. 30 | ASTM E 346-94 |
| 14 | Acidity as Acetic Acid mg/kg | max. 30 | ASTM D 1613-06 |
| 15 | Total Iron mg/kg | max. 0.1 | ASTM E 394-04 |
| 16 | Non Volative matter mg/kg | max. 8 | ASTM D 1353-03 |
| 17 | CAS No. | 67-56-1 | |
| 18 | U.N.No. | 1230 |
In Cattle Feed, Water Treatment (effluent), In neutralization of Acidic Effluent
Tanker Load, Seal Pack Drum, Repack Drum.
| Constituants | Composition (%) |
| CaCO3 | 92.00 - 93.00 |
| Moisture | 12 to 14 |
Methyl Formate is also known as methyl methanoate is a clear liquid with ethereal odor. It is a colorless liquid highly flameable and toxic in nature. Primarily used to manufacture formamide, dimethylformamide, and formic acid.
Di-Methyl Formamide (DMF), Pharmaceuticals, Metal Foundries, Fumigant and Larvicide for Tobacco, Organic Synthesis and in formulation of Synthetic Flavours, Cellulose Acetate solvent for Anisotropic.
Tanker Load, Seal Pack Drum.
| Methyl Formate Content | 92-97% by wt. |
| Methanol | Rest |
| Boiling Point Range | 31°C to 31.5°C (70% mixture to distill) |
| Density | 0.96 gms/cc ( 25°C) |
| Vapour Density | 2.07 |
| Vapour Pressure | 1.9 bar at 50°C |
| Ignition Limit | 5% to 23% at 100% Methyl Formate Concentration |
| Auto Ignition Temperature | 465°C |
| Flash Point | (-) 19°C |
| Threshold Limit Value (TLV) | 100 ppm |
| Reactivity | Contact with strong oxidizers may cause fire and explosions |
| CAS No. | 107-31-3 |
| UN No. | 1243 |
Used as a coagulant for obtaining rubber from latex. As an auxiliary for delining and pickling of fur, fixing of dyes-in leather industry and in processing in textile industry. As an intermediate in manufacturing of basic drugs, plant protection agents, pesticides, vulcanisation accelerators, antioxidants and cleaning agents. Used in preservation of silage and grams. Used in electroplating and as a solvent as well.
Stainless Steel tanker, HDPE drums
| Total Acidity as HCOOH | 85 % by mass min. |
| Water | Rest |
| Total Insoluble Matter | To pass the test |
| Heavy Metals as Pb | 20 ppm max. |
| Chlorides as Cl | 0.005% max. by mass |
| Non Volatile Matter | 0.08% max. by mass |
| Sulphate as SO4 | 0.005% max. by weight |
| Iron as Fe | 50 ppm max. |
| Boiling Point | 107°C |
| Melting Point | (-) 15°C |
| Specific Gravity | 1.192 at 25°C |
| CAS No. | 64-18-6 |
| UN No. | 1776 |
Flexible polyurethane foam (moulded), Mattresses, Pillows & Quilts, Furniture cushion, Automobiles: Seats, Furniture, Lining, Sun visors etc..., Padding & Lining : Garments, Shoes, Diaries, Carpets, Brief Cases, Bags, Purses etc., Acoustic Insulation, Industrial Gaskets, Protective pads for Sports & Medical use, Industrial, Automobiles & Household Filters, Paint Rollers, Packing : Electronic items, Frozen Foods, Medicines, Audio-video Computer CD’s, Applicators : Shampoos, Wax, Shoe Polish, Household Chemicals, Cleaning Tools for pipelines and tubes, Miscellaneous : Toys, rakhi etc., Any type of cushioning, C. A. S. E. Coating, Adhesives, Sealants, Elastomers
Steel Drums / Tankers
| Apperance | Clear liquid |
| APHA colour, max. | 25 |
| Sp. Gr. (at 20°C / 20°C) | 1.22 ± 0.02 |
| Purity (% by wt.), min. | 99.7 |
| Isomer Content (% by wt.) | |
| 2,4 TDI | 80 ± 1 |
| 2,6 TDI | 20 ± 1 |
| Total Acidity (ppm. by wt), max. | 40 |
| Hydrolyzable Chlorine (ppm.by wt.), max | 80 |
| Total Chlorine (ppm. by wt.) max. | 700 |
| CAS No. | 584-84-9 |
| UN No. | 2078 |
| Haz. Class | 6.1 |
| IMDG code page | 6269 |
Water fluoridation and wood preservation.
Tanker Load, Seal Pack Drum, Repack Drum.
| Guaranteed | Typical | |
| H2SiF6 (MOL. WT. 144.06) | 25% +/- 3% by weight | 24% |
| Fluorine | 19% +/- 3% by weight | 18.5% |
| Heavy Metals, as lead, Pb. | 0.020% MX. | 0.0002% |
| Phosphorous | - | 0.100% |
| HF | - | 1.0% |
| Arsenic | - | 0.0035% |
| Barium | - | 0.0035% |
| Cadmium | - | < 0.0002% |
| Chromium | - | 0.0004% |
| Iron | - | < 0.00003% |
| Iodine | - | 0.100% |
| Lead | - | 0.0015% |
| Mercury | - | < 0.00005% |
| Selenium | - | < 0.000003% |
| Silver | - | 0.0004% |
Nitrobenzene is a pale yellow water- insoluble organic compound with an almond like odor. It is highly toxic and gets readily absorbed through the skin. It is mainly used in production of aniline
Dyes & Dyes Intermediates : Benzidine, Nigrosine, Metanilic Acid, Magenta, m Nitro Chloro benzene, Induline, m-Di-Nitro Benzene, Quinoline Pharmaceuticals : Phenyle Butazone Pesticides : As Solvent Fluorescent whitening agent Flavours & Cosmetics Additives For High Press lubricants
Tanker Load
| Nitrobenzene Purity | 99.7% by wt., min. |
| Di-Nitrobenzene | 0.1% by wt., max. |
| Water | 0.1% by wt., max. |
| Benzene | 0.1% by wt., max. |
| CAS No. | 98-95-3 |
| UN No. | 1662 |
Sodium hypochlorite is an excellent steriliser, oxidiser and decolouring agent. ABCIL manufactures high quality sodium hypochlorite which is used to make disinfectants and a variety of pharmaceutical drugs. It is also widely used for water treatment.
Food, Home & personal care, Pharmaceuticals, Water Purification
Tanker Load, Seal Pack Drum, Repack Drum.
Stable bleaching powder is marketed under three brand names – Vikram, Shaktiman and Lion. It is used as a disinfectant in water treatment and also in the textiles, pulp and paper, and carpet industries.
Water treatment, Textiles, Epidemic control, Aquaculture, Carpet industry, Pulp and paper, Health departments, hotels, offices, homes etc.
Tanker Load, Seal Pack Drum, Repack Drum.
| Dry, free-flowing white powder, without hard lumps and impurities |
| Minimum 99.8 per cent passing through 1.70 mm IS sieve or 10 BSS sieve |
| Minimum 35 per cent by weight |
| On heating at 100 +/- 2 degree, does not lose more than 1/15th of Av Cl2 |
| Maximum 0.30 per cent by weight |
Municipal & Industrial Portable Water treatments, Municipal & Industrial Waste Water treatments, Sewage Water treatments, Separation of slurry in Industrial processes, Sizing in Paper & Pulp Industry, Decolorisation & Decontamination of dyes in Textile Industry
Tanker Load, Seal Pack Drum, Repack Drum.
| Sr. | Characteristic | Unit | PAC 10 | PAC 14 | PAC 18 | PAC 30 | ||
| MB | HB | MB | HB | |||||
| 1. | Appearance | Clear Pale Yellow | Pale Yellow | Pale Yellow | Pale Yellow | Pale Yellow | ||
| Liq. | Liq. | Liq. | Liq. | Powder | Powder | |||
| 2. | Aluminium as Al2O3 | % by Mass | 10.0 + 0.5 | 10.5 + 0.3 | 13.5 + 0.5 | 17.5 + 1.0 | 29.0 + 1.0 | 29.0 + 1.0 |
| 3. | Basicity | % by Mass | 40.0 + 5.0 | 64 (Min) | - | 45.0 + 5.0 | 40.0 + 5.0 | 64 (Min) |
| 4. | Chloride as Cl- | % by Mass | 11.5 + 1.0 | 9.5 + 1.0 | 20.5 + 1.5 | 20.5 + 1.5 | 33.0 + 2.0 | 29.0 + 2.0 |
| 5. | Sulphate as SO4, (Max) | % by Mass | 2.7 | 2.5 | Nil | Nil | 10 | 10 |
| 6. | Specific Gravity at 25oC | 1.2 + 0.04 | 1.2 + 0.02 | 1.32 + 0.02 | 1.37 + 0.02 | NA | NA | |
| 7. | Bulk Density | gm/ml | NA | NA | NA | NA | 0.65 (Min) | 0.65 (Min) |
| 8. | Insolubles, Max | % by Mass | 0.5 | 0.5 | - | - | 1.5 | 1.5 |
| 9. | pH of 5% Solution | w/v | 1.8 - 4.5 | 2.5 - 4.5 | 1.8 - 4.5 | 1.8 - 4.5 | 1.8 - 4.5 | 2.5 - 4.5 |
The raw material for Oleum is Sulphur.
Dyestuff Industries, Detergent Industries, As a whitening agent in Paper Industry, Petrochemical Products
Tanker Load, Seal Pack Drum, Repack Drum.
| Free Sulphur Trioxide % by mass Min. | 23% |
Formaldehyde-based resins are used for making particle boards, medium density fireboard, plywood, cabinets, laminated countertops and insulation. Throughout the chemical industry and in the production of textile binders and paints.
Tanker Load, Seal Pack Drum, Repack Drum.
| Commercially manufactured formaldehyde is usually sold in liquid form as formalin, a solution that is most commonly 37% formaldehyde. |
A1, Corporate House,
Shivalik Business Center,
Opp. Kens Ville Golf Academy,
Nr.Rajpath Club, Off. S.G Highway,
Bodakdev, Ahmedabad - 380059
Gujarat- INDIA
Copyright and Trademark 2022 A-1 Limited
All Rights Reserved.
Powered by Webplus
